This is by far one of the best mods you can do to improve your track times at DEs and AXs.

Our technoBrace Kit ties together the lower rear suspension struts which move considerably under heavy loads changing the rear camber at the least wanted time.

Installing the technoBrace will not alter whatsoever your everyday driving, but you will notice more precise cornering with no rear axle hopping during very aggressive driving.

The technoBrace Kit includes a beautifully finished, 22.2 mm (7/8”) hexagonal, solid aluminum rod (6061 alloy) carefully machined to fit on your car’s rear suspension, two automotive-grade M10x50 hex bolts and Installation Instructions with pictorials.

Installation takes about 15 minutes and you will need access to the vehicle’s rear suspension from underneath by either lifting the car using a lift, a jack and stands or ramps and simple tools.

Not available for Tiptronic-equipped cars.

The technoBrace is legal for PCA Cayman Spec Racing (SPC), for PCA Boxster Spec Racing (SPB) as well as for PCA Mid-Engine 1 (ME1) class.

Incredible performance enhancement at the Autocross with the technoBrace2

Kit includes:

• 22 mm (7/8") Ø solid hex bar

   (aluminum alloy 6061)

• Two (2) hex bolts

   Automotive  grade 10.9 M10x1.5x50

• Installation Instructions w/pictorials

For:

Boxster and Boxster S 986

Boxster and Boxster S 987

Cayman and Cayman S 987

Manual only. No PDK or Tiptronics