Door panel (card) delamination & warping

Please watch the short video below showing how to remove the door panels.

When you are ready to ship the panels:

You will need a cardboard box NO LARGER than 48" x 8" x 24", small-bubble bubble wrap material and packing tape. UPS Charges by weight and by volume so try to keep it as small and light as possible.

This size box may be difficult to find, but you can build your own.

Obtain a Large or Grand WARDROBE box from a moving supply store such as U-Store, U-Haul, Lowe's, Home Depot, etc.  

Wardrobe boxes will generally measure 48" x 22' x 22",  44" x 24" x 24" or similar.  Right there you have two of the three dimensions.  So just fold down one of the 24" or 22" sides to 8", cut off the excess cardboard and tape together.

The  minimum size (for two sportscar panels) is 42" x 7" x 22".

The packed box with both panels should weigh approximately 27 - 29 lbs.

Keeping the box size to the recommended size and weight will save you a lot in shipping!

If you have Macan or Canneye door panels to ship, keep in mind that those panels are larger and heavier than the sportscar panels and require a larger box.

Keep all of the removed trim pieces with you in a safe place, including the small triangular piece that sits on the top front of the panel.

Secure the loose blue connector with tape so that it doesn't get damaged in transit.

Wrap each panel in one layer of bubble-wrap only.  Place the panels leather-side to leather-side and one of the panels turned 180º so that the door handles are out of each other's way.

Tape the panels together so that they form one unit.  Place in the box and fill any voids with bubble wrap. - PLEASE DON'T USE PACKING PEANUTS - They make a big mess and get into the panel's innards.

If you call us at  (954) 385-0330 with the exact dimensions and weight of the packed panels, we will be happy to e-mail you, within minutes, a prepaid UPS shipping label (QR code) at our discounted rate (50%).

If you have your own shipping account and you would like to use it, just let us know.  Also, if you require faster shipping services (3-day, 2-day or overnight), we will be happy to ship according to your needs. We bill you our shipping cost.

Short video showing step-by-step panel removal

When we receive the panels we carefully inspect them for any damage. 

Any damage is photographed for records.

The repair procedure includes:

• General cleaning of panel to  better assess damage.

• Removal of adhesive remnants from prior botched repair (if present)

• Mechanical repairs to any broken plastic (if required)

• Preparation of delaminated surfaces using specialized cleaners, primers and


   adhesion promoters

• Application of specialized adhesives

• Allow curing time

• Inspection including placing panel in a jig to check for warping.  


•  If warped, panel is then re-formed back to OEM shape to assure a perfect fit

    when installed

•  Final inspection and thorough cleaning

• Panels are packed and shipped back according to your instructions.

(*) per panel, depending on damage and/or previous repair

technoPanel

$299 - $499*

PLUS  S & H